Manual printing of textiles and cotton way

Manual printing of textiles and cotton method (t-shirt - Bdihat Women - canvas Bristol - Bdihat Karina - Lycra)

Print by silk screen (Alhablonh)

The materials used in the hand-printing process Silk Screen

1. The quality of silk (silk 48 - Silk 43 - 70 silk - Silk 77) is due to the raw material quality and usability of absorption and design in terms of the size of the font or font size

2 - sensitive aqueous (25 - Blu-sensitive Gel) in the case of the use of water pasta

3 - water slurries - paste Fouath (silk) - paste Guamq (3000) - pulp bleached 2000

4 - Alaskooij (leather handle provider for the printing process through the clouds on Alhablonh)

5 - Macquah (to install the print on specific ores)

6 - Design work or Aldizin and by photographing design Alcalk transparent paper

7 - Bijmn (color) Center

Steps printing process

1. We pulled silk metal or wooden frame Available as an appropriate tightening terms of calories unfolded and be a good tight from all directions

2 - We are turning over sensitive material well and then we do the sensitization Alhablonh in dim light or red light sensitive material because the main factor is the process of transfer of the design on paper or film is Alcalk white lighting, taking into account that the design should be a good quality Inking

3 -nicom put design on the lantern lighting white color (neon) and then we put Alhablonh on the design situation the right to print and put on Alhablonh bag or waxed and then we put load on the tarpaulin to block out light and better use sand to ensure complete blocking of light and then we adjust the lighting time by size and space imaging lantern

4 - after the end of the time we take Alhablonh lighting and discharged from the sensor with water until we see the light variation of the pores to be printing them and then we drained Alhablonh well Bala_i_oar (hot air)

5 - We have installed Alhablonh printing machine or handmade waterwheel machine or to use a normal hinges on proving credenza will be performed by typing

6 - We paste the design on the raw material to be printed out in the desired position and we move the raw material (t-shirt, for example) down Alhablonh until matching the design process pasted on which shirt design on the Alhablonh then we put an explanatory signs of the situation ideal to match the rest of the T-shirts on one characters Terpzh printing or specifically pen Filomastr this guide to be put to rest Altichertat and so we have provided an angle to the rest of the T-shirts to be printed

7 - Stir the dough and coded Bmrkmat required color (Albijmnat)

8 - we poured into the dough Alhablonh abundant quantity and allowing us to cover the design process Bajeenh colored

9 - we do the printing withdraw Alaskooij (handle) Once only with pressure simple and then we raise Alhablonh and during the process of withdrawal by the shirt and put last we covered Alhablonh toward reverse or in the same direction and the meaning of it is to cover Alhablonh inside ink without pressure to guarantee us the process of non-drying ink in the pores of silk

10 - After we dry the ink on the shirt, which Balki to install Edition

11 - After the completion of the printing process Alhablonh please wash immediately with water and a hose water pressure in the pores in order to ensure the possibility of using Alhablonh Again

Writing - engineer Ramy Elabd